工业软管泵输油不足的可能原因及解决方法齿轮泵故障排除10个隔油环齿轮泵应能连续供油，齿轮啮合重叠系数应大于1。当一对齿轮未脱离啮合时，另一对齿轮已进入啮合状态。这样，当有两对齿轮同时啮合时，两对齿轮的齿啮合线之间形成一个封闭的体积，其中部分油也被困在其中。
Possible causes and solutions for insufficient oil delivery of industrial hose pumps. Gear pump troubleshooting. 10 oil-separating ring gear pumps should be able to supply oil continuously, and the gear meshing overlap factor should be greater than 1. When one pair of gears is not disengaged, the other pair of gears has entered the meshed state. In this way, when there are two pairs of gears meshing at the same time, a closed volume is formed between the tooth meshing lines of the two pairs of gears, and part of the oil is also trapped therein.
工业软管泵(俗称：供给泵、高泥泵、脱流泵等)是吸收了国外先进技术而开发的一种新型的、多功能、多用途工业泵。它摆脱了传统泵叶轮和轴密封的运行模式，具有极大的优势，尤其是在粘度大、腐蚀性大、流体杂质大的介质输送上面。 软管泵的优势：特有的无密封结构，无任何泄漏和污染；采用先进的滚动技术，压辊不需要任何润滑；自吸能力强并具有自清理能力，能正反吸料；简易的软管装配，安装维修简单，维修费用低，操作简单；流量可进行线性调节，并有一定的计量功能；对粘度大有杂质的流体输送不产生任何堵塞；泵的使用寿命长，扬程高和泵口压力大。
扫一扫
